InLine 76660U interface cards/adapter Internal SATA

Multifunctional M.2 to SATA converter cardfor the connection of up to four SATA drives M.2 Key B+M interfacefor the operation of an M.2 SATA SSD RAID support (RAID 0, RAID 1, RAID 10, HyperDuo)for optimum data security and performance Hot Plug & Hot Swapfor the installation and removal of drives during operation Port Multiplier supportfor parallel operation of multiple drives on one SATA port No additional drivers required– full support by the operating system

The InLine® interface card M.2 Key B+M to 4x SATA connectoris a high-performance storage solutionthat enables the expansion of SATA storage devices. It allows the operation of an M.2 SATA SSD(Key B+M) and also provides four SATA 6 Gb/s portsfor additional storage devices. Thanks to RAID support (RAID 0, RAID 1, RAID 10, HyperDuo), the card can be used for maximum speed, reliability or automatic SSD/HDD caching combinations. The Hot Plug and Hot Swapfunctionality allows drives to be swapped during operationwithout having to shut down the system. The M.2 SSD is powered directly via the M.2 slot, while the SATA ports are connected via external cables. LED indicatorsshow the operating status of the ports, and support for Port Multiplier technologyallows multiple drives to operate simultaneously on a single SATA port. Technical data:

Bus type & interface: M.2 PCIe x2 interface (dual-thread, B, M and B+M key) Controller/chipset: Marvell 88SE9230 Connection – interfaces: 1 x M.2 slot (Key B+M) for one M.2 SATA SSD 4 x SATA GEN III ports (6 Gb/s per port) 4 x 7-pin SATA connectors for the connection with M.2 SATA/mSATA SSDs to the mainboard

Compatible modules: M.2 SSDs (Key B, Key M or Key B+M) in the sizes 2230, 2242, 2260, 2280 mSATA SSDs (half or full size)

Data rates: SATA ports: Up to 6 Gb/s per channel M.2 interface: Up to 10 Gb/s total throughput (via 2x PCIe lanes)

Dimensions: 30 mm x 42 mm (M.2 board)

Operating conditions:

Operating temperature: -40 °C to +85 °C

Functions:

Hot Plug & Hot Swap for drive replacement during operation Native Command Queue (NCQ) for optimized data processing Port Multiplier support for multiple drives per SATA port RAID modes: RAID 0 (striping), RAID 1 (mirroring), RAID 10 (stripe of mirrors), HyperDuo (automatic SSD/HDD caching) Automatic detection of the lane configuration during boot Onboard LED indicators to display the port activities Power supply for the M.2 SSD is provided directly via the M.2 slot SATA ports must be connected via external cables No additional driver required

System requirements:Hardware:

PC with at least one free M.2 slot (B, M or B+M that supports PCIe) Mainboard with free SATA ports for data transfer One available PCIe connector for the installation of the adapter

Operating system support:

Windows: 11, 10, 8, 7, Vista, XP Windows Server: 2003, 2008 Linux: from kernel 2.6

Scope of delivery:

1 x InLine® interface card M.2 Key B+M to 4x SATA connector, RAID, HyperDuo 4 x SATA cable 1 x instruction manual (German/English) Operating temperature: 0° C – 55° C Storage temperature: -40° C – 70° C Humidity: 10% - 90% non-condensing